Introduction The tribological features of the transmission clutch and band play a vital role in governing transmission shift performance and the durability of the clutch and band components. In terms of tribology, an automatic transmission […]
By Dr. Neil Canter, Contributing Editor | TLT Tech Beat March 2024Thin-film composite membranes prepared with a new type of polymer demonstrate promise in separating crude oil components. HIGHLIGHTS • Separation of crude oil by […]
Introduction The engine tribology plays a crucial role in achieving effective lubrication for all moving engine parts, aiming to minimize friction and wear while minimizing environmental impact. This is challenging due to the diverse operating […]
By Dr. Neil Canter, Contributing Editor | TLT Tech Beat February 2024 A minimum applied voltage of 6V is required to produce a volatile, flammable species from a nonvolatile ionic liquid. HIGHLIGHTS • A potential […]
Introduction Once again, with temperatures dropping and substantial snowfall, Christmas plans are at the mercy of winter’s icy influence, coinciding with one of the United States’ busiest travel weeks. The frigid conditions result in perilously […]
By Dr. Neil Canter, Contributing Editor | TLT Tech Beat February 2024 Experimental work identifying that the reaction exhibits an oscillation effect was verified by theoretical analysis. HIGHLIGHTS • Insight into the Fischer-Tropsch reaction revealed […]
By Dr. Neil Canter, Contributing Editor | TLT Tech Beat February 2024 A new approach has the potential to overcome three issues that make it challenging to build these systems. HIGHLIGHTS • Pumped storage hydropower […]
By Dr. Neil Canter, Contributing Editor | TLT Tech Beat January 2024 Evaluation of the iron and steel industry was made by organizing plants into six categories based on number of years of operation. HIGHLIGHTS […]
By Dr. Neil Canter, Contributing Editor | TLT Tech Beat January 2024 Adjusting the counterion of specific catholyte materials led to identification of catholytes that are completely incompatible with anolytes. HIGHLIGHTS • A non-aqueous redox […]
“Wear caused by friction is one of the main reasons for the failure of equipment and parts,” states one Scientific Reports article. Lubricants themselves play a crucial role in the metal forming process for this reason, […]
