Revision for “What is Tribology?” created on April 19, 2022 @ 20:53:26
What is Tribology?
<h2>What is Tribology?</h2> <p style="text-align: justify;">Tribology is the science of friction, wear, and lubrication and is truly interdisciplinary. It studies the interaction of moving surfaces and every aspect related to friction, wear, lubrication, adhesion, tribochemistry, etc. Tribology solutions are applied in <a href="http://tribonet.org/car-2020-and-tribology-research/">automotive industry</a>, bearings, space, sports, food, health and biomedical, <a href="http://www.tribonet.org/triboelectricity-a-big-renewable-energy-source/" target="_blank" rel="noopener noreferrer">renewable energy</a>, and other numerous fields.</p> Here is a nice video summary explaining tribology: <lite-youtube videoid="DOPaMCE_ais"></lite-youtube> <p id="p0010" style="text-align: justify;">The term "tribology" is derived from the Greek word ‘tribos’ (τρίβοσ) meaning ‘rubbing’ or to rub and it was invented in 1964, while exploration of friction has started well in the past sometime 50,000 B.C. when humans started using it to get fire (see <a href="http://www.tribonet.org/tribology-history/">history of tribology</a>). Ancient civilizations in Egypt and China applied lubrication principles to transport heavy stones used in their gigantic buildings. However, the first systematic studies of tribology were performed by <a href="http://tribonet.org/who-is-the-first-leonardo-da-vinci/">Leonardo da Vinci</a> - the first tribologist of the world in 1490-1500. He focused on all kinds of friction and made a distinction between sliding and rolling friction.</p> <p style="text-align: justify;">The importance of tribology rises due to the fact that frictional and wear losses consume energy, which otherwise could be saved. Professor Jost estimated that minimal investment (with the ratio of 1 to 50 to the outcome) in research and development of better tribological practices could save from 1% to 1.4% of gross national product . Besides economical effects, tribology can be used to reduce [math] CO_2[/math] emissions by increasing the energy efficiency and thus help to maintain our planet. <a href="http://www.tribonet.org/car-2020-and-tribology-research/" target="_blank" rel="noopener noreferrer">Transportation industry</a> is one of the largest energy consumers, but also [math] CO_2 [/math] emission source while being potentially largely optimized by using cutting-edge tribology solutions. <a href="http://www.tribonet.org/small-particles-big-impact/" target="_blank" rel="noopener noreferrer">Wear particles</a> can be a source of mechanical damage in bearings, disk breaks, <a href="http://www.tribonet.org/tribology-and-mems/" target="_blank" rel="noopener noreferrer">MEMS</a>, but also are harmful to human health if penetrate from the atmosphere to the human body. The outcomes of the tribological research therefore can be used to solve important problems of society.</p> <lite-youtube videoid="Boqt79-J1ak"></lite-youtube> <h2>Green Tribology</h2> <p style="text-align: justify;">The term green tribology has become part of the vocabulary now. Green tribology is a branch of tribology that relates specifically to maintaining an ecological balance of any potential environmental and biological impacts of the interactions between various surfaces that can occur between materials. Green tribology works to ensure that any friction and wear occurring between materials happens in an environmentally friendly manner. Researchers in the green tribology field are also looking at wind-power turbines, solar panels, and tidal turbines. They are focusing on being more environmentally friendly and sustainable in the future.</p> <p style="text-align: justify;">Green tribology has three basic principles aimed at ensuring a limited impact on the environment and human health. These three principles are biomimetics (imitating the models, systems, and elements of nature in order to solve complex human problems) and self-lubricating materials and surfaces, biodegradable and environmentally friendly lubrication, and renewable and/or sustainable sources of energy.</p> [caption id="attachment_32754" align="aligncenter" width="638"]<img class="wp-image-32754" src="https://www.tribonet.org/wp-content/uploads/2019/07/image-result-for-green-tribology-pictures.jpeg" alt="Image result for green tribology pictures" width="638" height="479" /> <a href="https://www.slideshare.net/sumitc19/green-tribology-72195249">Image Source</a>[/caption] <p style="text-align: justify;">Specifically, green tribology looks at minimizing friction, minimizing wear, reducing and/or eliminating lubrication, creating natural lubrication, maintaining green engineering and chemistry principles, and real-time monitoring of tribology systems.</p> <p style="text-align: justify;">Green tribology is a fairly new concept; however, it is already playing an important role in ensuring that all industrial systems are able to function in an environmentally friendly way. Additionally, researchers are looking at methods for integrating green tribology and developing systems that are completely sustainable in terms of engineered design and energy production.</p> <h2 style="text-align: justify;">Lubrication</h2> <p style="text-align: justify;">To control friction and wear <a href="http://www.tribonet.org/wiki/what-are-lubricants/" target="_blank" rel="noopener noreferrer">lubricants</a> are used. Lubricants separate rubbing surfaces from direct contact by creating a lubricant film. The film protects the surfaces from wear and the lubricant is chosen to control (mostly reduce) friction. Lubricants can be in liquid, gaseous, solid forms, or even a combination of them as in the case of emulsions and greases .</p> <p style="text-align: justify;">Often, lubricants are liquid oils and they generate a very thin lubricant layer to separate the rubbing surfaces. This layer is shared more easily than the solids would and therefore, the friction and in many cases wear are reduced. The classical <a href="http://www.tribonet.org/wiki/elastohydrodynamic-lubrication-ehl/" target="_blank" rel="noopener noreferrer">(elasto-)hydrodynamic lubrication theory</a> can be effectively used to predict the thickness of the film, but also friction generated by the lubricant and to design mechanical components. For most common engineering materials and conditions, the friction of the layer is less than the friction between the solids. Besides separating the surfaces, liquid lubricants also reduce temperature rise, clean the surfaces, eliminate wear debris and regenerate protective films. It should be noted, however, the classical lubrication theory of the friction reduction has reached its fundamental limit (the friction of 0.01-0.04) and cannot help to reduce friction further. Therefore, other theories have to be developed.</p> <h2 style="text-align: justify;">Superlubricity</h2> <p style="text-align: justify;">The major drawback of the classical lubrication approach to reduce friction and wear is the reliance on the development of a sufficiently thick lubricant film to separate the surfaces from direct contact. Unfortunately, the thickness of the film is largely determined by the viscosity of the lubricant. To separate two microscopically rough surfaces from contact, a lubricant film thicker than the level of the roughness is needed, so the viscosity has to be high enough. Higher viscosity means higher friction force is developed by the lubricant on the surfaces of solids and results in higher energy losses. As it was mentioned above, this brings the fundamental limit to the application of the hydrodynamic lubrication approach.</p> <p style="text-align: justify;"><a href="http://tribonet.org/so-what-is-it-superlubricity/">Superlubricity</a> is a recently invented term in tribology, which is generally defined as the state, at which the friction coefficient is low. The definition of “low” is not quite clear, but it can be assumed less than 0.01-0.001. Due to the generality of the definition, the mechanisms of superlubricity can be of various nature. At the nanoscale, the structural superlubricity may occur, if the crystal lattices of the contacting bodies are <a href="http://tribonet.org/superlubricity-in-graphene-nanoribbon-gold-interface/">incommensurate</a>. The formation of nano bearings may also lead to the <a href="http://tribonet.org/macroscale-superlubricity/">superlubricity</a> state by changing the friction from sliding to rolling. Ultra-low friction was reported in glycerol/water mixture lubricated steel pairs due to the generation of the easily sharable <a href="http://www.tribonet.org/superlubricity-between-steel-surfaces-using-glycerolwater-mixture/">hydrogen-bonded layer</a>. Van der Waals repulsive forces were shown to be capable to lead to a superlubricity state between a <a href="http://www.tribonet.org/superlubricity-by-means-of-repulsive-van-der-waals-forces/">gold AFM tip and Teflon substrate</a>. The realization of the mentioned superlubric states typically requires very special conditions, such as vacuum, or materials, such as graphene, diamond-like carbon, etc. Therefore, translation of the superlubric state into macroscale and ordinary environments is a challenge.</p>
Administration of the project